Category: Stationary Crushers

A Wet Magnetic Separator is a device used to separate and recover magnetic minerals from non-magnetic materials in a wet processing environment. It is widely used in mineral processing, recycling, and other industries where magnetic separation is required.

Key Features:
1. Wet Processing – Operates with water or slurry, making it suitable for fine particles.
2. Magnetic Field – Uses permanent magnets or electromagnets to attract magnetic materials.
3. High Efficiency – Effective for separating weakly magnetic minerals like hematite, limonite, and ilmenite.
4. Adjustable Intensity – Some models allow control over magnetic field strength.

Types of Wet Magnetic Separators:
1. Drum-Type Magnetic Separator
– A rotating drum with an internal magnet attracts magnetic particles while non-magnetics flow away.
– Used in iron ore beneficiation and heavy media recovery.

2. High-Gradient Magnetic Separator (HGMS)
– Uses a matrix (steel wool or grooved plates) to capture fine weakly magnetic particles.
– Common in kaolin clay purification and rare earth mineral processing.

3. Vertical Ring & Pulsating High-Gradient Magnetic Separator (VPHGMS)
– Combines pulsating fluid flow with high-gradient fields for better separation efficiency.

4. Wet Belt Magnetic Separator
– Uses a conveyor belt system to continuously remove ferrous materials from slurries.

Applications:
– Iron ore beneficiation (magnetite, hematite).
– Heavy media recovery in coal washing.
– Purification of non-metallic minerals (quartz, feldspar).
– Recycling of metals from industrial waste streams.

Advantages:
– High recovery rate for fine particles.
– Low operational cost compared to dry separators.
– Can handle large volumes of slurry efficiently.

Limitations:
– Requires water, which may need treatment before disposal.
– Not suitable for extremely coarse materials.

Would you like details on a specific type or application?

It seems like you’re asking about a dryer, but your query is a bit brief. Could you clarify which type of dryer you’re referring to? Here are some common possibilities:

1. Clothes Dryer (Laundry Appliance)
– A machine that removes moisture from clothes after washing.
– Types:
– Vented Dryers (release moist air outside).
– Condenser Dryers (collect water in a tank).
– Heat Pump Dryers (energy-

icient, recycles hot air).
– Common brands: LG, Samsung, Whirlpool, Bosch.

2. Hair Dryer (Blow Dryer)
– An electrical device used to dry and style hair by blowing hot or cool air.
– Features: Adjustable heat/speed settings, ionic technology for reduced frizz.

3. Hand Dryer (Public Restroom Appliance)
– Electric devices that dry hands quickly using high-speed air (e.g., Dyson Airblade).

4. Food Dehydrator (Drying Food)
– Removes moisture from fruits, vegetables, or meats for preservation.

Let me know if you need details on a specific type—I’d be happy to help! 😊

A rotary kiln is a large, rotating cylindrical furnace used in various industrial processes to heat materials to high temperatures (typically between 900°C and 1,500°C or higher). It is widely used in industries like cement production, metallurgy, chemical processing, and waste treatment.

Key Components of a Rotary Kiln:
1. Cylinder (Shell): A long, slightly inclined steel tube lined with refractory bricks to withstand high temperatures.
2. Drive System: Motors and gears that rotate the kiln at a controlled speed (typically 0.5–5 RPM).
3. Support Rollers & Tyres (Riding Rings): Bearings that support the kiln’s weight and allow smooth rotation.
4. Burner & Fuel System: Provides heat using fuels like coal, gas, oil, or alternative fuels (e.g., waste materials).
5. Refractory Lining: Heat-resistant material inside the kiln to protect the shell and retain heat.
6. Seals: Prevent air leakage at the inlet and outlet.
7. Cooling & Exhaust Systems: Manage temperature and emissions.

How a Rotary Kiln Works:
1. Material Feed: Raw materials (e.g., limestone, ore, or waste) enter the kiln’s upper end.
2. Rotation & Heating: The inclined kiln rotates slowly, causing material to move toward the hotter end while being heated by the burner.
3. Chemical Reactions: High temperatures trigger processes like calcination (e.g., turning limestone into lime), reduction (metals), or clinker formation (cement).
4.

charge: Processed material exits at the lower end for cooling/further processing.

Applications of Rotary Kilns:
1. Cement Production:
– Calcination of limestone to produce clinker (main component of Portland cement).
2. Metallurgy:
– Roasting/refining ores (e.g., iron, aluminum, zinc).
– Production of sponge iron via direct reduction (DRI).
3. Chemical Industry:
– Manufacturing lime, alumina, titanium dioxide, etc.
4. Waste Treatment:
– Incineration of hazardous waste or sewage sludge.
– Pyrolysis of tires/plastics for recycling.

Advantages:
✔ Continuous processing with high throughput.

A rod mill is a type of tumbling mill used in grinding (comminution) processes, primarily in the mining and mineral processing industries. It is similar to a ball mill but uses long cylindrical steel rods as the grinding media instead of balls.

Key Features of Rod Mills:
1. Grinding Media: Uses steel rods (typically 50–100 mm in diameter and slightly shorter than the mill length) instead of balls.
2. Particle Size Reduction: Produces a more uniform particle size distribution with fewer fines compared to ball mills, as rods grind particles by line contact rather than point contact.
3. Operation: Operates at lower rotational speeds (~60-75% of critical speed) to prevent rod tangling and promote cascading motion.
4. Applications:
– Primary grinding stage (coarse grinding).
– Preparing feed for ball mills in wet or dry circuits.
– Used in cement, coal, and chemical industries (less common than ball mills).

Advantages:
– Less over-grinding of fine particles compared to ball mills.
– Better control of particle size distribution.
– Suitable for brittle materials like coal and limestone.

Disadvantages:
– Not ideal for very hard materials (rods wear faster than balls).
– Requires careful operation to avoid rod breakage or tangling.

Comparison with Ball Mills:
| Feature | Rod Mill | Ball Mill |
||-|-|
| Grinding Media | Steel rods | Steel or ceramic balls |
| Particle Size | Coarser, more uniform | Finer, wider size distribution |
| Speed | Lower (~60-75% critical speed) | Higher (~70-80% critical speed) |
| Over-grinding | Less likely | More likely |

Rod mills are often used in open-circuit grinding or before ball mills in a two-stage grinding process, particularly in mineral processing plants handling ores like tungsten, tin, or gold.

Would you like details on specific applications or operational parameters?

The HGT Gyratory Crusher is a high-capacity, heavy-duty primary crushing machine designed for large-scale mining and quarrying applications. It combines advanced technology, robust construction, and intelligent automation to deliver superior performance.

Key Features of the HGT Gyratory Crusher:
1. Advanced Crushing Technology
– Utilizes a patented concave design for optimized crushing efficiency.
– Intelligent automation system (PLC + touch screen control) for precise adjustments.

2. High Capacity & Efficiency
– Large feed opening and high crushing ratio for handling oversized materials.
– Continuous crushing action reduces downtime and boosts productivity.

3. Robust & Durable Construction
– Heavy-duty frame and high-quality alloy steel components for long service life.
– Integrated hydraulic system for easy maintenance (e.g., mantle replacement).

4. Smart Control System
– Real-time monitoring of operational parameters (load, pressure, temperature).
– Remote diagnostics and automated adjustments to optimize performance.

5. Environmental & Safety Features
– Low noise and dust emission design compliant with environmental regulations.
– Safety interlocks to protect operators and equipment.

Applications:
– Large-scale mining (iron ore, copper, gold).
– Quarry

for aggregates (limestone, granite).
– Cement production and industrial mineral processing.

Advantages Over Jaw Crushers & Cone Crushers:
✔ Higher throughput capacity (up to 14,000 t/h in some models).
✔ More uniform particle size output due to continuous gyratory motion.
✔ Lower maintenance costs with automated wear compensation.

Popular Models:
– HGT4265 / HGT5065 / HGT5475 / HGT6275 / HGT7565 (numbers indicate feed opening size in mm).

Would you like details on a specific model or technical specifications?

The CI5X Series Impact Crushers are advanced crushing machines developed by Liming Heavy Industry, designed for high efficiency, reliability, and low operating costs. They are widely used in mining, construction, aggregate production, and recycling applications.

Key Features of CI5X Impact Crushers:
1. Optimized Rotor & Impact Cavity
– Heavy-duty rotor design with high-precision balancing for stable operation.
– Multi-functional hydraulic operating system for easy adjustment and maintenance.

2. High Crushing Efficiency
– Adjustable impact plates and optimized crushing chamber enhance material processing.
– Suitable for primary and secondary crushing of medium-hard to hard materials.

3. Durable Wear Parts
– High-quality alloy blow bars and impact plates extend service life.
– Modular design allows quick replacement of wear components.

4. Intelligent Control System
– PLC (Programmable Logic Controller) automation for precise operation monitoring.
– Real-time fault detection and remote diagnostics improve maintenance efficiency.

5. Energy Saving & Environmental Protection
– Low noise and dust emission compliant with environmental regulations.
– Efficient hydraulic system reduces power consumption.

Technical Specifications (General Range)
| Model | Feed Opening (mm) | Max Feed Size (mm) | Capacity (t/h) | Power (kW) |
|-|-|–|-||
| CI5X1213 | 1250×1250 | 600 | 200-350 | 160-220 |
| CI5X1315 | 1300×1500 | 800 | 300-500 | 250-315 |
| CI5X1520 | 1500×2000 | 1000 | 500-800 | 400-500 |

Applications
– Aggregate Production: Crushing limestone, granite, basalt, etc.
– Mining & Quarrying: Efficient processing of ores and minerals.
– Construction Waste Recycling: Reuse of concrete, asphalt, and demolition debris.

Advantages Over Competitors
✔ Higher throughput with lower energy consumption
✔ Reduced downtime due to easy maintenance access
✔ Enhanced safety features for operator protection

For detailed specifications or customized solutions, consult Liming Heavy Industry’s official documentation or contact their technical support team.

Would you like additional details on installation or operational guidelines?

The C6X Series Jaw Crusher is a high-performance primary crushing machine developed by Liming Heavy Industry (China). It is designed for tough crushing applications in mining, quarrying, and recycling industries, offering improved efficiency, durability, and intelligent control features.

Key Features of C6X Jaw Crusher:
1. Robust Structure
– Optimized welded frame design for higher strength and fatigue resistance.
– High-quality cast steel components (e.g., movable jaw, eccentric shaft) for extended service life.

2. Advanced Crushing Technology
– Non-welded Frame: Prevents stress concentration and enhances reliability.
– Dual Wedge Adjustment System: Allows quick and precise discharge opening adjustments.
– Optimized Cavity Design: Improves crushing efficiency and reduces energy consumption.

3. High Efficiency & Low Cost
– Deep crushing chamber increases capacity and reduces blockage risks.
– Higher speed and stroke enhance productivity with lower operational costs.

4. Intelligent Control & Safety
– Compatible with automated control systems for real-time monitoring (e.g., load, temperature).
– Overload protection devices ensure safe operation.

5. Easy Maintenance
– Modular design simplifies replacement of wear parts (e.g., jaw plates).
– Lubrication system reduces friction and extends bearing life.

Technical Specifications (Example Model: C6X110)
| Parameter | Value |
|–||
| Feed Opening | 1100×850 mm |
| Max Feed Size | ≤800 mm |
| Capacity | 160–450 t/h |
| Motor Power | 160 kW (215 HP) |
| Weight | ~30,000 kg |
| Discharge Range | 75–200 mm (adjustable) |

Applications
– Primary crushing of hard rocks (granite, basalt, ir

ore).
– Mining, quarrying, construction aggregates.
– Recycling concrete and demolition waste.

Advantages Over Traditional Crushers
✔ Higher reliability with reduced downtime.
✔ Energy-efficient operation with optimized kinematics.
✔ Smart integration for Industry 4.0-ready plants.

For specific model details or customization options, consult the manufacturer’s guidelines or contact Liming Heavy Industry directly.

Would you like assistance with installation or operational recommendations?

The VSI6S Vertical Shaft Impact Crusher is a high-performance sand-making and shaping machine developed by Liming Heavy Industry, designed for producing high-quality aggregates, manufactured sand, and optimizing particle shape in the crushing process. It is part of the 6th generation of vertical shaft impact crushers, featuring advanced technology for improved efficiency, lower wear costs, and better product gradation.

Key Features of VSI6S Vertical Shaft Impact Crusher:
1. Advanced Rotor Design
– Optimized deep cavity rotor for higher throughput and better crushing efficiency.
– Adjustable speed control to fine-tune product size and shape.

2. Crushing Chamber Innovations
– Multiple crushing modes (rock-on-rock, rock-on-iron) for different applications.
– Improved material flow to reduce blockages and increase productivity.

3. Low Wear & Maintenance Costs
– High-quality wear-resistant materials (e.g., tungsten carbide tips) extend service life.
– Easy-access design for quick replacement of wear parts.

4. Energy Efficiency & Environmental Benefits
– Reduced power consumption compared to traditional crushers.
– Lower noise levels and dust emissions for compliance with environmental standards.

5. Intelligent Control System (Optional)
– PLC-based automation for real-time monitoring and adjustments.
– Remote diagnostics to minimize downtime.

6. Versatile Applications
– Ideal for producing high-quality sand for concrete, asphalt, and construction.
– Suitable for shaping aggregates in mining, quarrying, and recycling industries.

Technical Specifications (Example Model)
| Parameter | Value |
|-|–|
| Max Feed Size | ≤50mm |
| Capacity | 50-650 t/h |
| Motor Power | 110-400 kW |
| Rotor Speed | Adjustable (1000-2000 rpm) |
| Weight | ~10-20 tons (varies by model) |

Advantages Over Traditional Crushers:
✔ Better particle shape (cubical output).
✔ Higher sand yield with lower fines content.
✔ Lower operational costs due to reduced wear.
✔ Flexible configuration (stationary or mobile setups).

Applications:
– Manufactured sand production (M-Sand)
–

regate shaping for highways, railways, and buildings
– Recycling of construction waste & industrial minerals

Conclusion:
The

The B Series VSI Crusher (Vertical Shaft Impact Crusher) is a high-performance crushing machine designed for producing high-quality sand and shaping aggregates. It is widely used in the production of artificial sand, metal ores, cement, refractory materials, and other industrial applications.

Key Features of B Series VSI Crusher:
1. Advanced Rotor Design
– Optimized for higher throughput and better particle shape.
– Available in open or enclosed configurations for different material types.

2. High Crushing Efficiency
– Uses a rock-on-rock or rock-on-steel crushing principle for superior reduction.
– Produces well-graded, cubical end products.

3. Low Operating Costs
– Wear-resistant components reduce maintenance frequency.
– Hydraulic lid opening system for easy access to internal parts.

4. Versatile Applications
– Ideal for tertiary and quaternary crushing stages.
– Suitable for abrasive materials like basalt, granite, quartz, etc.

5. Automation & Control
– Equipped with modern control systems for real-time monitoring.
– Adjustable rotor speed for optimal performance.

6. Energy Efficient
– Designed to minimize power consumption while maximizing output.

Common Applications:
– Sand production for concrete & asphalt
– Aggregate shaping in quarries
– Mineral processing (e.g., iron ore, gold ore)
– Recycling (glass, construction waste)

Popular Models (Varies by Manufacturer):
– Barmac B7150SE (Metso Outotec)
– CV217 (Sandvik)
– Other OEM variations with similar capabilities.

Would you like details on a specific brand/model or operational guidance? Let me know how I can assist further!

A Deep Rotor VSI (Vertical Shaft Impactor) Crusher is an advanced type of rock crushing equipment designed for high-efficiency shaping and sand-making applications. It features a unique deep rotor design that enhances material throughput, reduces wear, and improves crushing performance compared to traditional VSI crushers.

Key Features of Deep Rotor VSI Crusher:
1. Deep Rotor Design
– The rotor is deeper than standard VSI crushers, allowing for higher material processing capacity and better particle shaping.
– Reduces turbulence in the crushing chamber, improving efficiency.

2. High Crushing Efficiency
– Optimized impact angles and speed ensure superior particle shape (cubical) for construction aggregates and manufactured sand.
– Suitable for tertiary and quaternary crushing stages.

3. Low Wear & Maintenance
– Uses wear-resistant materials (e.g., tungsten carbide tips) to extend the lifespan of wear parts.
– Reduced downtime due to durable components.

4. Versatile Applications
– Ideal for producing high-quality sand and gravel for concrete, asphalt, and road base materials.
– Effective in crushing hard and abrasive materials like granite, basalt, and quartz.

5. Adjustable Control
– Allows fine-tuning of product size by adjusting rotor speed and feed rate.
– Some models support hydraulic lid opening for easy maintenance.

6. Energy-Efficient Operation
– Optimized design reduces power consumption while maintaining high output.

Typical Applications:
– Manufactured sand (M-Sand) production
– Aggregate

ping for construction
– Mineral processing (e.g., iron ore, bauxite)
– Recycling (concrete, glass)

Comparison with Standard VSI Crushers:
| Feature | Deep Rotor VSI | Standard VSI |
|||-|
| Rotor Depth | Deeper | Shallower |
| Wear Resistance | Higher | Moderate |
| Throughput | Higher | Lower |
| Particle Shape | Superior | Good |

Leading Manufacturers:
– Sandvik (CV series)
– Metso Barmac® B Series™
– Liming Heavy Industry (China)

Would you like details on a specific model or operational parameters?