Jaw Crusher تي هڪ مختصر نوٽ لکو
زبردست جبڑے کولڻ وارو: معدني پروسيسنگ جو بنياد
The jaw crusher stands as one of the most fundamental, مضبوط, and widely utilized pieces of equipment in the entire spectrum of mineral processing, مجموعي پيداوار, کان کني, ۽ ري سائیکلنگ. Its enduring popularity stems from its simple yet highly effective design principle, remarkable reliability, versatility in handling diverse materials, and relatively straightforward operation and maintenance. Essentially a machine designed to reduce large rocks or ore into smaller fragments, it serves as the primary workhorse for the crucial first stage of size reduction – primary crushing.
Core Design Principle and Working Mechanism
ان جي دل تي, a jaw crusher functions on the elegantly simple principle of mechanical pressure. It comprises two essential jaws:
1. مقرر جبو (اسٽيشنري مرڻ): This rigid plate forms the frame of the crusher chamber and remains immobile during operation.
2. متحرڪ جبو (Swing Die): This jaw is mounted on an eccentric shaft that imparts a highly characteristic elliptical motion to it. The movable jaw is typically inclined relative to the fixed jaw.
The crushing action unfolds in a cyclical process:
1. کاڌو: خام مال (کاڌو) is introduced into the top opening of the crushing chamber (کاڌ خوراڪ جو افتتاح) between the two jaws.
2. ڪمپريشن (Crushing Stroke): جيئن ته سنسڪرت شافٽ گھمندو آهي, it drives the movable jaw towards the fixed jaw. The material trapped between them experiences intense compressive force. This force exceeds the material's fracture stress, causing it to break along natural cleavage planes or through direct fracture.
3. خارج ٿيڻ (Return Stroke): On the return stroke of the movable jaw (driven by flywheels and often assisted by toggle plates/tension rods), the gap between the jaws increases at their bottom end. This allows the crushed material, now reduced in size, to gravitate downwards through this increasing gap.
4. Gravity Discharge: The smaller fragments fall freely through the discharge opening at the bottom of the chamber once they are small enough to pass through its set width.
5. Cycle Repetition: The cycle repeats continuously as new feed enters from above and previously crushed material moves down and exits.
The size reduction ratio achieved depends primarily on two factors:
The Gap Setting: The minimum distance between the bottom edges of the jaws at their closest point during compression determines the maximum product size exiting through this discharge opening ("بند طرف سيٽنگ" - سي ايس ايس). Adjusting this setting controls product size distribution.
