Fabricante de contrato de peneira vibratória de coque, melhor preço

Your Screening Operation Is Losing Profit—Here's the Data

Every ton of coke that passes through an undersized or poorly matched vibration screen costs your plant in three measurable ways: rejected product (até 8% of throughput lost to offspec material), tempo de inatividade não planejado (média 14 hours per month for screen deck changes on inferior units), e excessive power consumption (older screens draw 30–40% more energy per ton processed). Plant managers report that blinding and pegging on coke fines alone can reduce effective screening area by 25% within the first 200 horário de funcionamento.

Are you still accepting 92% screening efficiency when 98% is achievable with the correct equipment? Is your current screen supplier delivering replacement parts within 48 horas, or are you stockpiling inventory because lead times stretch beyond three weeks? The difference between a commodity screen and a purposebuilt coke vibration screen from a contract manufacturer with direct pricing is the difference between margin erosion and consistent throughput.

Visão geral do produto: Peneira vibratória de coque resistente

Este equipamento é um linearmotion, peneira vibratória multideck engineered specifically for coke handling—from green coke dewatering to calcined coke sizing. The operational workflow follows five stages:

1. Distribuição de alimentos – Material enters via a flared feed box with replaceable wear liners, spreading across the full width of the screen deck to prevent material segregation.
2. Estratificação – Linear vibration (6.3–8.2 Gforce range) causes fine particles to migrate downward through the material bed toward the screen surface.
3. Separação – Material passes through woven wire or polyurethane screen panels (custom aperture sizes from 0.5 mm para 150 milímetros) on 1–4 decks.
4. Descarga de tamanho excessivo – Material retained on each deck exits through dedicated chutes, with impactabsorbing rubber liners at all transfer points.
5. Coleção subdimensionada – Fines pass through to a common discharge or individual collection hoppers, depending on plant configuration.

Escopo de aplicação: Suitable for coke breeze screening, coke dewatering, coke crushing circuits, and final product sizing in steel mills, aluminum smelters, and calcining facilities. Limitações: Not designed for materials exceeding 150°C continuous operating temperature without hightemperature bearing upgrades; not recommended for materials with more than 15% moisture content without heated deck options.

Recursos principais

HeavyDuty Exciter Assembly

Base Técnica: Dualshaft, counterrotating exciter with spherical roller bearings rated for 50,000hour L10 life under full load.
Benefício Operacional: Your operators will experience consistent vibration amplitude regardless of material load variation—no amplitude dropoff when feed rate spikes.
Impacto do ROI: Eliminates the 12–18% efficiency loss common with beltdriven exciters; reduces bearing replacement frequency from every 18 meses para cada 48 meses.

Modular Screen Panel System

Base Técnica: Tensioned polyurethane panels with 40–55 Shore A durometer, reinforced with steel inserts at bolt holes.
Benefício Operacional: Panel changeout time drops from 8 horas (bolted steel decks) para 2.5 hours per deck using quickrelease wedge systems.
Impacto do ROI: At $180/hour plant downtime cost, each panel change saves $990 em produção perdida. Annual savings exceed $15,000 for plants with quarterly screen changes.

SelfCleaning Ball Deck Assembly

Base Técnica: Rubber balls (25–50 mm diameter) housed in individual pockets beneath the screen surface, activated by screen vibration.
Benefício Operacional: Continuous cleaning action prevents blinding from sticky coke fines—maintains 95%+ open area even with 8–12% moisture content.
Impacto do ROI: Reduces manual cleaning frequency from twice per shift to once per week; eliminates the 4% production loss from blinded screen area.

Wear Protection Package

Base Técnica: 12 mm thick AR400 steel liners at feed impact zones; 10 mm ceramic tile lining on side plates and discharge lips.
Benefício Operacional: Your maintenance team will replace wear liners every 18–24 months instead of every 6–8 months on standard carbon steel screens.
Impacto do ROI: $4,200 saved annually in liner replacement materials and $6,800 in labor costs for a single 2.4 m × 6.0 m screen.

Adjustable Stroke and Angle

Base Técnica: Variable eccentric weights on exciter shafts (adjustable in 15° increments); deck angle adjustable from 0° to 25° via turnbuckle mounts.
Benefício Operacional: One machine can be tuned for green coke (high moisture, pegajoso) or calcined coke (abrasivo, seco) without mechanical modifications.
Impacto do ROI: Eliminates the need for dedicated screens for different coke types—single machine handles multiple products, saving $85,000–$120,000 in capital expenditure.

Contenção de Poeira Integrada

Base Técnica: Full enclosure with gasketed inspection doors and negativepressure dust collection ports (150–300 mm diameter).
Benefício Operacional: Your plant meets OSHA PEL limits for respirable coke dust (0.15 mg/m³) without additional hooding or ductwork.
Impacto do ROI: Avoids $25,000–$50,000 per year in potential OSHA fines and reduces respiratory protection program costs by 40%.

Interface de monitoramento remoto

Base Técnica: Sensores de vibração (triaxial accelerometers) and temperature probes at exciter bearings, transmitting data via 4–20 mA loop or Modbus RTU.
Benefício Operacional: Your control room receives realtime alerts when vibration levels deviate by more than 10% from setpoint—before bearing failure occurs.
Impacto do ROI: Reduz o tempo de inatividade não planejado 60% (field data from 14 instalações); each avoided bearing failure saves $8,500 in parts and $22,000 em produção perdida.

Vantagens Competitivas

| Métrica de desempenho | Padrão da Indústria | Nossa solução de peneira vibratória de coque | Vantagem |
|||||
| Eficiência de triagem (4 mm cut) | 88–92% | 96–98% | +6–10% improvement |
| Deck Change Time (por baralho) | 6–8 hours | 2–2.5 hours | 65–70% faster |
| Vida útil do rolamento | 18–24 months | 48–60 meses | 100–150% longer |
| Consumo de energia (kWh/tonelada) | 0.35–0.45 | 0.22–0.28 | 35–40% reduction |
| Nível de ruído em 1 medidor | 92–98 dB(UM) | 82–86 dB(UM) | 10–12 dB(UM) redução |
| Tempo médio entre falhas | 1,200 horas | 3,800 horas | 216% melhoria |
| Replacement Part Lead Time | 3–6 weeks | 48–72 hours | 85–90% faster |

Especificações Técnicas

| Parâmetro | Valor (Modelo Padrão) | Valor (HeavyDuty Model) |
||||
| Capacidade (coque, 25 mm cut) | 150–250 tons/hour | 300–450 tons/hour |
| Área da tela | 4.8 m² – 14.4 m² | 9.6 m² – 24.0 m² |
| Number of Decks | 1–3 | 2–4 |
| Amplitude de vibração | 6–12 mm (ajustável) | 8–14 mm (ajustável) |
| Frequência de vibração | 750–1,000 RPM | 700–900 RPM |
| GForce Range | 4.5–7.2 G | 5.0–8.2 G |
| Potência do motor | 7.5–22 kW per exciter | 15–45 kW per exciter |
| Velocidade do motor | 1,500 RPM (4pole) | 1,500 RPM (4pole) |
| Screen Panel Material | Poliuretano (40–55 Shore A) | Poliuretano + steel backing |
| Aperture Range | 0.5 milímetros – 100 milímetros | 1.0 milímetros – 150 milímetros |
| Tamanho da alimentação (máx.) | 75 milímetros | 150 milímetros |
| Temperatura operacional | 20°C to +80°C | 20°C to +120°C (with HT bearings) |
| Peso (vazio) | 4,200–8,500 kg | 7,800–15,200 kg |
| Dimensões Gerais (C×L×A) | 4.5 m × 2.2 m × 2.8 eu | 6.8 m × 3.0 m × 3.5 eu |
| Fonte de energia | 380–480 V, 3fase, 50/60 hertz | 380–690 V, 3fase, 50/60 hertz |

Cenários de aplicação

Steel Mill Coke Breeze Screening

Desafio: A Midwestern U.S. steel mill was losing 12% of coke breeze production due to undersized screens (2.4 m × 4.8 eu) that could not handle peak feed rates of 180 tph. Blinding from 9% moisture content required two operators per shift to manually clean decks, adding $62,000/year in labor costs.
Solução: Installed a 2.4 m × 7.2 m dualdeck coke vibration screen with selfcleaning ball decks and 6 mm polyurethane panels. Feed box redesigned with AR400 liners to handle impact from 75 mm coke.
Resultados: Screening efficiency improved from 88% para 97%. Manual cleaning eliminated entirely. Annual labor savings: $62,000. Recovered product value: $184,000/ano (1,200 tons of previously rejected material). Período de retorno: 11 meses.

Calcined Coke Sizing at Aluminum Smelter

Desafio: An aluminum smelter in the Gulf Coast region needed to produce three product fractions (25 mm × 12 milímetros, 12 mm × 6 milímetros, e 6 mm × 0 milímetros) from calcined coke with 8% umidade. Existing tripledeck screens experienced bearing failures every 14 meses, causando 36 horas de inatividade por evento.
Solução: Supplied a 3.0 m × 7.2 m tripledeck screen with heavyduty spherical roller bearings (Vida L10: 55,000 horas) and modular polyurethane panels with 12 milímetros, 6 milímetros, e 3 aberturas mm. Integrated dust containment with 250 mm duct ports.
Resultados: Bearing failures eliminated over 28 meses de operação. Product specification compliance improved from 91% para 99.2%. Dust emissions reduced by 85%, achieving compliance with EPA MACT standards. Total cost of ownership reduced by 38% compared to previous equipment.

Green Coke Dewatering at Refinery

Desafio: A Gulf Coast refinery processing delayed coke needed to reduce moisture content from 18% para baixo 10% before calcining. Existing rotary dewatering screens consumed 0.52 kWh/ton and required weekly screen deck replacement due to abrasion from coke fines.
Solução: Installed a 2.4 m × 6.0 m singledeck linear motion screen with 0.5 mm slotted polyurethane panels and highGforce exciter (7.8 G). Heated deck option added for coldweather operation.
Resultados: Moisture content reduced to 8.2% consistentemente. Energy consumption dropped to 0.26 kWh/ton—a 50% redução. Screen panel life extended from 7 dias para 6 meses. Annual energy savings: $47,000. Panel replacement cost reduction: $38,000/ano.

Considerações Comerciais

Níveis de preços de equipamentos

| Modelo | Área da tela | Convés | Preço Base (USD) | Typical Lead Time |
||||||
| CVS48 | 4.8 m² | 1–2 | $38,000–$52,000 | 8–10 weeks |
| CVS72 | 7.2 m² | 1–3 | $55,000–$78,000 | 10–12 weeks |
| CVS96 | 9.6 m² | 2–3 | $72,000–$105,000 | 12–14 weeks |
| CVS144 | 14.4 m² | 2–4 | $98,000–$145,000 | 14–18 semanas |
| CVS240 | 24.0 m² | 2–4 | $165,000–$240,000 | 18–22 weeks |

Prices are FOB factory, excluding installation and commissioning. Volume discounts available for orders of 3+ unidades.

Optional Features and Pricing

| Recurso | Price Addition | ROI Justification |
||||
| Hightemperature bearing upgrade (to 150°C) | +$4,200 | Extends service life in calcined coke applications by 3× |
| Heated deck system (elétrico, 220 V) | +$8,500 | Enables operation at 15%+ moisture without blinding |
| Ceramic tile side plate lining | +$3,800 | Extends side plate life from 3 years to 10+ anos |
| Pacote de monitoramento remoto (sensores + gateway) | +$6,200 | Reduz o tempo de inatividade não planejado 60% |
| Capa coletora de pó com dutos | +$4,500–$9,000 | Achieves OSHA compliance without plant modifications |
| Kit de peças de reposição (rolamentos, selos, panels) | +$3,200–$7,500 | Reduces downtime from 48 horas para 2 hours for common failures |

Pacotes de serviços

| Pacote | Coverage | Annual Cost | Included Services |
|||||
| Básico | 12 meses partes | $0 (garantia) | Replacement parts for manufacturing defects |
| Padrão | 24 meses partes + trabalho | $4,800/ano | Quarterly inspection, diagnóstico remoto, priority parts shipping |
| Prêmio | 36 months full coverage | $8,200/ano | All of Standard + onsite service within 48 horas, annual vibration analysis report |

Opções de financiamento

• Líquido 30 Termos – Standard for approved credit customers (mínimo $50,000 annual purchase history)
• Alugar para propriedade – 36month lease at 4.9% APR with $1 opção de compra; monthly payments from $1,150 (CVS48 model)
• Equipment Financing – 12–60 month terms through partner lenders; taxas de 6.5% APR for qualified buyers
• Volume Discount – 8% discount on orders of 3+ unidades; 12% discount on orders of 5+ unidades

Perguntas frequentes

P: How does this screen handle the abrasive nature of calcined coke compared to standard aggregate screens?
UM: Standard aggregate screens use 6 mm mild steel liners and standard bearings. Our coke screen uses 12 mm AR400 steel at all impact zones, ceramic tile lining on side plates, and spherical roller bearings with hardened races (Rockwell C60 minimum). Dados de campo de 18 installations shows side plate wear rates of 0.3 mm per year versus 2.1 mm per year on standard screens.

P: What is the maximum moisture content this screen can handle without blinding?
UM: With the standard polyurethane panels and selfcleaning ball deck, the screen maintains 95%+ open area at up to 12% umidade. For moisture content between 12% e 18%, we recommend the heated deck option (electric resistance heating elements beneath the screen surface). Acima 18% umidade, a dewatering screen with slotted panels is more appropriate.

P: Can this screen be retrofitted into an existing structure without modifying the support steel?
UM: Sim, in most cases. Our standard mounting footprint matches common industry dimensions (2.4 m × 6.0 eu, 3.0 m × 7.2 eu). We provide detailed foundation drawings with dynamic load calculations. For nonstandard installations, we offer custom base frame adapters at an additional cost of $3,500–$6,000, dependendo da complexidade.

P: What is the typical delivery time for replacement screen panels?
UM: Standard polyurethane panels (all aperture sizes) ship within 48 hours from our regional warehouses. Custom aperture sizes require 10–14 working days. We recommend maintaining a spare set of panels for each deck (approximately $1,200–$2,800 per set) to eliminate downtime during panel replacement.

P: How does the pricing compare to OEM screens from major manufacturers?
UM: Our base pricing is 25–35% lower than comparable models from major OEMs (por exemplo, Raízes, Sandvik, Terex). This is achieved through direct manufacturing without dealer markups and standardized component sourcing. Total cost of ownership over 5 years is typically 30–40% lower due to reduced maintenance requirements and longer component life.

P: Qual cobertura de garantia é fornecida, and what is excluded?
UM: Standard warranty covers manufacturing defects in materials and workmanship for 12 meses a partir do comissionamento ou 18 meses a partir do envio, o que ocorrer primeiro. Excluded items: peças de desgaste (painéis de tela, forros, selos), damage from improper installation, operation outside specified parameters, and modifications without written approval. Extended warranty packages are available as listed in the service packages section.

P: Can this screen be integrated with existing PLC and SCADA systems?
UM: Sim. The vibration monitoring system outputs 4–20 mA signals for vibration amplitude, temperatura do rolamento, and motor current. Modbus RTU (RS485) communication is standard. We provide full register maps and can integrate with AllenBradley, Siemens, and Schneider Electric platforms. Custom protocol integration (Profibus, DeviceNet, Ethernet/IP) is available at an additional cost of $1,800–$3,200.