1. PEMBUKAAN PAINPOINT DRIVEN

Are you facing persistent bottlenecks in your gold recovery circuit that cap your plant’s profitability? Operational challenges with gravity concentration and final recovery directly impact your bottom line. Titik kesakitan biasa termasuk:

Inconsistent Fine Gold Capture: Standard sluices and concentrators can lose ultrafine (<30 mikron) and flattened flake gold, resulting in a measurable loss of revenue with every ton processed.
Kos Buruh Operasi yang Tinggi: Manual cleanup of conventional equipment is timeintensive, requiring skilled personnel to be pulled from other critical tasks, increasing labor costs and potential security risks.
Masa Henti Berlebihan untuk Pembersihan: Frequent shutdowns to perform cleanouts disrupt continuous processing flow, reducing overall plant availability by hundreds of hours annually.
Water and Chemical Dependency: Many recovery methods rely heavily on large water volumes or complex chemical regimes, escalating operational costs and environmental management complexity.

How do you upgrade your recovery stage to maximize yield without introducing excessive complexity or downtime? The solution requires precision engineering focused on the specific density and mobility characteristics of liberated gold.

2. GAMBARAN KESELURUHAN PRODUK: HYBRID KNUDSEN BOWL CENTRIFUGAL CONCENTRATOR

The Hybrid Knudsen Bowl is an advanced centrifugal concentrator engineered for the highefficiency capture of free gold, particularly fine and flour gold. It operates on an enhanced gravitational separation principle within a controlled fluidized bed.

Aliran Kerja Operasi:
1. Pengenalan suapan: A slurry feed, typically from a primary concentration stage, is introduced into the rotating bowl.
2. Pemisahan Empar & Pencairan: High rotational forces amplify gravitational pull, settling dense gold particles. Controlled fluidization water maintains a teeter bed, allowing heavy particles to penetrate while ejecting lighter gangue.
3. Kepekatan Berterusan & Bed Management: Gold builds within the concentrate bowl. The system’s design manages bed density to prevent compaction and maintain optimal recovery efficiency throughout the cycle.
4. Automated or Manual Cleanout: After a set operational cycle (biasanya 412 jam), rotation stops. The concentrated product is easily flushed into a secure container for further processing or direct smelting.

Skop Permohonan & Batasan:
Skop: Ideal for free gold recovery in both alluvial/placer operations and hard rock mill circuits as a rougher or cleaner concentrator. Highly effective on 8 mesh to ultrafine (<10 mikron) gold when properly liberated.
Batasan: Not effective on locked or refractory ores requiring chemical treatment. Requires a consistent feed density and particle size distribution for optimal performance. Feed must be screened to remove +8mm material.

3. CIRI TERAS

Automated Fluidization Control | Asas Teknikal: Pengawal Logik Boleh Aturcara (Plc) managing solenoid valves | Faedah Operasi: Maintains precise fluidized bed density without operator adjustment, ensuring consistent recovery across varying feed grades | Kesan ROI: Eliminates manual tuning errors, improving fine gold recovery consistency by an estimated 1525% berbanding sistem manual.

CorrosionResistant Composite Bowl | Asas Teknikal: Injectionmolded polyurethane with ceramic wear liners | Faedah Operasi: Eliminates metallic contamination of concentrate, reduces maintenance downtime due to abrasion, and simplifies cleaning | Kesan ROI: Extends wear life by 3x compared to steel bowls, reducing spare parts inventory and direct replacement costs.

Pemacu Frekuensi Boleh Ubah (VFD) Motor Control | Asas Teknikal: AC motor with digital speed controller | Faedah Operasi: Operator boleh memperhalusi kelajuan putaran (Gforce) in realtime to match specific feed characteristics (mis., kandungan tanah liat, gold size) | Kesan ROI: Optimizes performance for varying ore types within a single shift, maximizing overall plant recovery without equipment changeover.

LowWashwater Design | Asas Teknikal: Engineered internal water channels and fluidization jets | Faedah Operasi: Operates efficiently with 3050% less washwater than previous generation centrifugal concentrators | Kesan ROI: Reduces water pump horsepower requirements and lowers water recycling load, decreasing energy and water handling costs.

Secure, Integrated Concentrate Tray | Asas Teknikal: Lockable stainless steel catch tray with quickdisconnect fittings | Faedah Operasi: Provides secure collection of valuable concentrate directly from the bowl outlet, streamlining material handling and enhancing site security | Kesan ROI: Minimizes handling losses and reduces cleanup labor time by approximately 60%.

4. KELEBIHAN KOMPETITIF

| Metrik Prestasi | Piawaian Industri (Penumpu Empar Asas) | Hybrid Knudsen Bowl Solution | Kelebihan (% Penambahbaikan) |
| : | : | : | : |
| Pemulihan Emas Halus (<30 mikron) | Dianggarkan 7080% capture rate under ideal conditions | Data medan menunjukkan konsisten 9296% kadar tangkapan dalam ujian terkawal| +20% penambahbaikan |
| Average Cleanout Cycle Time| 4560 minutes per unit (manual disassembly & pembersihan) | <15 minutes per unit (integrated flush system) | ~75% pengurangan masa henti |
| Penggunaan Air setiap Tan Diproses| ~5 cubic meters per tonne processed average| ~2.8 cubic meters per tonne processed average| 44% pengurangan |
| Annual Wear Component Cost (Bowl/Liners)| High – frequent replacement due to metal fatigue/abrasion| Low – composite bowl life exceeds 12 months in typical service| ~65% pengurangan |

5. SPESIFIKASI TEKNIKAL

Penamaan model: HKBC2500i
Kapasiti Pemprosesan: Hingga 15 tan sejam (slurry dependent; nominal 68 tph for highgrade feeds).
Keperluan kuasa: 7.5 motor pemacu utama kW (400V/50Hz atau 480V/60Hz), VFD disertakan.
Keperluan Air: 2040 L/min at 200 kPa pressure.
Spesifikasi Bahan: Kerangka utama: Keluli karbon bersalut serbuk; Bowl Assembly: Reinforced polyurethane with replaceable ceramic inserts; Fluidization System: Stainless steel fittings.
Dimensi Fizikal (L x W x H): 1.8m x 1.5m x 1.6m; Berat Operasi: 420 kg.
Julat Operasi Persekitaran: Suhu persekitaran: 10°C hingga +45°C; Humidity protected electrical components standard.

6. SENARIO APLIKASI

Hard Rock Mill Tailings Scavenging Plant Challenge:

A midtier gold operation was experiencing elevated gravity recoverable gold (GRG) assays in final tailings streams (>0.3 g/t), indicating significant loss postprimary grinding circuit.

Penyelesaian:

Two HKBC2500i units were installed in parallel on the combined cyclone underflow stream ahead of leaching as a scavenger circuit.

Keputusan:

Within one quarter, tailings GRG assays were reduced to <0.1 g/t consistently.The circuit recovers an average of 22 kg of additional fine gold monthly,directly impacting cash flow without disrupting core CIL operations.Recovered concentrate purity allows for direct smelting onsite.

Alluvial/Placer Operation Upgrade Challenge:

A largescale placer mine using traditional sluices faced high labor costs for cleanup,frequent grade fluctuations due to inefficient fine gold capture,and security concerns during manual concentrate collection.

Penyelesaian:

Replacement of two primary sluice lines with a bank of four HKBC2500i units fed via a centralized distribution manifold.

Keputusan:

Labor dedicated to cleanup was reduced from three operators per shift to one.Security was enhanced via locked collection trays.Plant managers reported a measured increase in overall recovered grade by18%,attributed primarily to superior fine gold retention.The system's consistency smoothed out processing fluctuations from variable feed gravels.

7.PERTIMBANGAN KOMERSIL

Equipment pricing is structured around configuration level:

Tier Unit Asas ($85k$110k):
Includes core HKBC concentrator,VFD drive,basic starter panel,and installation manual.Suitable for operations with existing supporting infrastructure(air,pam,pembingkaian).

Peringkat Loji Dioptimumkan ($135k$165k):
Includes Base Unit plus integrated feed distribution module,buffer tank with level control,solenoid washwater package,and PLCbased automation controller.Recommended for new installations or major upgrades seeking maximum operational simplicity.

Ciri Pilihan & Pakej:

Advanced Instrumentation Package(Tahap & Pressure sensors)
Mobile SkidMounting Frame
Waranti Lanjutan(3 years parts/labor)
Pakej Perkhidmatan:

Pentauliahan & Latihan Di Tapak(5day program)
Annual Performance Audit & Recalibration
Priority Parts Dispatch Program(24/7 sokongan)

Financing Options are available through partnered industrial lenders including operating lease structures,taxefficient finance leases,and projectbased capital equipment loans.Terms typically range from36to60months based on credit profile

8.Soalan Lazim

Q:What upstream preparation does my feed slurry require before entering the Hybrid Knudsen Bowl?
A:The unit requires screened feed(removal of+8mm material)and consistent solids density between25%40%.A degritting cyclone or simple classifying screen is often sufficient.Particle liberation must already be achieved upstream

Q:What is the expected payback period for this equipment?
A Based on case study data payback periods range from6to14months depending on feed grade operational scale(labour savings)and current inefficiencies.This calculation should be based on your specific incremental recovered metal value versus operational cost savings

Q Can this unit replace our entire existing gravity circuit?
A It functions most effectively as either a primary concentrator on liberated alluvial feeds or as acleaner/scavenger unitinahardrockcircuit We recommend it as partofasystem often following initial roughing(sluices tables)

Q How does this compare environmentallytochemicalmethods like cyanidation?
A Asa purely physicalgravityseparation device it uses no chemicals significantly less waterand produces no toxic tailings relatedtoreagent use It createsa smeltreadyconcentrate reducing downstream processing complexity

Q What technical supportisavailable during commissioning?
A Standard purchases include detailed installation manualsandremote support The recommended commissioning package providesonsite engineer supportforfive days covering installation calibration operator trainingandinitial performancebaselining