1. PAINPOINT DRIVE NOLEING

Are you facing escalating operational costs and unpredictable downtime in your gold recovery circuit? The efficiency of your final recovery stage directly impacts your bottom line, yet many operations struggle with inconsistent yields, high reagent consumption, and laborintensive processes. These challenges manifest as measurable losses: every percentage point of unrecovered fine gold represents significant annual revenue left in the tails. Are you contending with frequent screen blockages that halt production for cleaning? Is your current process failing to capture micronsized particles, leading to visible gold loss in your tailings dam? Managing these inefficiencies often requires additional manpower and complex chemical balances, driving up both operational expenditure and environmental management costs. The central question for plant managers is clear: how can you achieve maximum payable gold recovery with greater operational consistency and lower total cost of ownership?

2. БҮТЭЭГДЭХҮҮНИЙ ТОЙМ

Тухайлах ялгац гишүүн {{түлхүүр үг}} өндөр хүчин чадалтай, continuous concentration device designed for the efficient recovery of free gold, ялангуяа нарийн ба микрон хэмжээтэй хэсгүүд, from grinding circuit discharges and leach feed. It operates on a patented centrifugal separation principle, replacing or augmenting traditional batchoperated concentrators.

Үйл ажиллагааны ажлын урсгал:
1. Тэжээх танилцах: Slurry from the grinding mill or cyclone underflow is evenly distributed into the rotating bowl of the {{түлхүүр үг}}.
2. Төвөөс зугтах концентраци: HighG forces pin heavy gold particles against the collection grooves, while lighter gangue material is fluidized and washed out.
3. Тасралтгүй гадагшлуулах: Concentrated heavy material is automatically discharged at programmed intervals into a secure collection vessel without interrupting the feed flow.
4. Tailings Removal: Depleted slurry (сүүл) exits the unit continuously, ready for downstream processing or reporting to tails storage.

Хэрэглээний хамрах хүрээ: Үнэгүй алтыг эргүүлэн авахад тохиромжтой >50 microns in size within closedcircuit milling operations, as a primary concentrator for alluvial/heap leach feed preconcentration, or as a scavenger device ahead of leaching/CIL tanks.

Хувьсгал: Not suitable for primary comminution; efficiency diminishes on slimesdominated feeds (<10 микрон) without preclassification; requires a consistent feed density and pressure for optimal performance.

3. ҮНДСЭН ОНЦЛОГ

Сайжруулсан шингэнжүүлэх систем | Техникийн үндэслэл: Precisely engineered fluidizing water channels & pressure control | Үйл ажиллагааны ашиг тус: Maintains an active fluid bed that prevents compaction, ensuring high retention of fine gold while continuously ejecting light minerals | ROI нөлөө: Reduces gold losses by up to 35% compared to nonfluidized systems, directly increasing recovered ounces.
Automated Discharge Sequence | Техникийн үндэслэл: Програмчлагдах логик хянагч (Импорт) with timer or massbased sensor triggers | Үйл ажиллагааны ашиг тус: Eliminates manual panning and shutdowns for concentrate removal, enabling 24/7 unattended operation | ROI нөлөө: Cuts operator labor requirements by an estimated 60% per shift and increases uptime by preventing unnecessary circuit stops.
AbrasionResistant Liner Assembly | Техникийн үндэслэл: Modular liners cast from highchrome alloy or polyurethane composite | Үйл ажиллагааны ашиг тус: Withstands continuous abrasive slurry flow, extending service life in highsilica ore bodies | ROI нөлөө: Доторлогоо солих давтамжийг бууруулна 4050%, lowering spare parts inventory costs and maintenance downtime.
Хувьсах хурдны хөтөч (VSD) | Техникийн үндэслэл: Хувьсах давтамжийн нэгдсэн хөтөч бүхий хувьсах гүйдлийн мотор (VFD) controller | Үйл ажиллагааны ашиг тус: Allows operators to finetune Gforce (from 60G to 200G) to match specific ore gravity characteristics and particle size distribution | ROI нөлөө: Optimizes recovery efficiency across varying ore types without hardware changes, maximizing paymetal capture.
LowPressure Feed Requirement | Техникийн үндэслэл: Gravityfed design with optional lowhead feed pump | Үйл ажиллагааны ашиг тус: Operates effectively with low feed pressure (<25 psi), simplifying integration into existing plant layouts without major pumping upgrades | ROI нөлөө: Lowers ancillary energy consumption by up to 30% compared to highpressure cyclone systems.

4. ӨРСӨЛДӨХ ДАВУУ ТАЛУУД

| Гүйцэтгэлийн хэмжүүр | Аж үйлдвэрийн стандарт (Batch Centrifugal Concentrator) | {{түлхүүр үг}} Хариу (Continuous Centrifugal Concentrator) | Давуу тал (% сайжруулалт) |
| : | : | : | : |
| Operational Uptime | Requires stop/start cycle every 24 hours for cleaning (~85% uptime) | Continuous operation with automated discharge (>95% үргэлж ажиллах) | +12% effective processing time |
| Нарийн алтны нөхөн сэргээлт (<100 шүүр)| Тооцоолсон 8592%, highly operatordependent | Тогтвортой 9297%, systemcontrolled fluidization improves fines retention| +58% recovery efficiency |
| Хөдөлмөрийн эрчмүүд| High requires dedicated operator for manual concentrate handling| Low one operator can monitor multiple units; automated discharge| 60% labor hours per ton processed |
| Урвалжийн хэрэглээ| Often requires frothers/surfactants to improve recovery in batch systems| Enhanced physical capture reduces or eliminates need for auxiliary chemicals| Шалтгаална, хамаарна 100% reduction in specific reagents |

5. ТЕХНИКИЙН ҮЗҮҮЛЭЛТҮҮД

Хүчин чадал / Үнэлгээ: Continuous throughput of 30 50 cubic meters per hour of slurry (dependent on feed density).
Эрчим хүчний шаардлага: 15 кВт-ын үндсэн хөтөч мотор (400V/50Hz эсвэл 480V/60Hz); VFD included. Feed pump requirements are sitespecific.
Материалын үзүүлэлтүүд: Bowl and fluidization channels lined with replaceable NiHard or CeramicFilled Polyurethane liners; structural frame in carbon steel with corrosionresistant coating.
Физик хэмжээсүүд: Approximate footprint of 2.5m L x 1.8m W x 2.2m H; жин ойролцоогоор. 2,800 kg dry.
Байгаль орчны үйл ажиллагааны хүрээ: 20°С-аас +50°С хүртэлх орчны температурт зориулагдсан; IP65 rating on electrical components for dust and water protection.

6. ХЭРЭГЛЭЭНИЙ СУРТАЛЧИЛГАА

Hard Rock Mine – Grinding Circuit Scavenger | Сорилт: A West African operation reported consistent visible gold in cyclone overflow samples despite a downstream intensive leach reactor (ILR). Batch concentrators were overloaded by mill throughput.| Хариу: Two {{түлхүүр үг}} units installed in parallel on the combined ball mill discharge. Automated timers set for concentrate discharge every 20 minutes.| Үр дүн: Field data showed a reduction of gravityrecoverable gold (GRG) reporting to the CIL circuit by over 80%. Overall plant recovery improved by 2.1%, paying back the equipment investment in under five months.

Alluvial / Placer Operation – Primary Concentration | Сорилт: A South American placer mine used sluices followed by manual panning, resulting in high labor costs and inconsistent fine gold capture during fluctuating feed grades.| Хариу: A single {{түлхүүр үг}} deployed as the primary concentration step after trommel scrubbing, fed via a constantdensity sump.| Үр дүн: The operation achieved consistent >95% recovery of +150 mesh gold while reducing the required processing crew from six to two persons per shift.

7. АРИЛЖААНЫ ХЭРЭГЛЭЭ

Үнийн шатлал: Pricing is configurationdependent.
Base Unit includes core concentrator with PLC controls and standard liners.
Premium Package adds integrated variable speed drive (VSD), masssensor discharge automation, and spare liner kit.
Plant Scope includes multiple units skidmounted with shared feed distribution manifold and controls.

Нэмэлт шинж чанарууд: Remote monitoring telemetry package; өөр доторлогооны материал (жишээ нь e., natural rubber); stainless steel construction for highsalinity environments; customfabricated safety guarding.

Үйлчилгээний багцууд: Standard warranty covers parts for one year/labor included only if installed by certified technician). Extended service agreements available covering scheduled maintenance inspections, liner replacements at fixed costperhour rates.

Санхүүжилтийн сонголтууд: Direct leasetoown financing through partner institutions over terms up to five years can be structured as an operating expense rather than capital expenditure.

8. Түгээмэл асуултууд

1. Is the {{түлхүүр үг}} compatible with our existing cyclones and mill discharge setup?
Yes it is designed as a modular addition Most installations use a simple splitter box on existing launder systems Minimal civil works are typically required

2 What impact will installing this have on our downstream processes like leaching
A positive impact By removing more free gold upstream you reduce load on your leach circuit This can lead to shorter retention times lower cyanide consumption

3 How do we quantify potential return on investment before purchase
We provide GRG test kits You send us samples we conduct analysis using pilot scale equipment This generates data on recoverable gravity gold content allowing accurate revenue projections

4 What are typical ongoing maintenance requirements
Primary maintenance involves periodic liner inspection replacement based on abrasiveness Liners last months not days Electrical components require standard industrial motor care Annual bearing inspection recommended

5 Does it require specialized operators
No Basic training focuses on startup procedures monitoring control panel readings concentrate handling Standard mill operators typically proficient within one shift

6 Are there financing options available outside direct purchase
Yes Several commercial models exist including equipment leasing which preserves capital lines rental agreements short term trials before commitment

7 Can it handle sulphide associated gold or only free milling ore
It recovers liberated gravity recoverable gold For refractory ores where gold locked sulphides it will recover only free portion Pre concentration still valuable but overall recovery limited degree liberation