1. OUVERTURE ENTRAÎNÉE PAR POINT DE DOULEUR

Is your gold processing plant struggling with the foundational stage of mineral liberation? Inefficient primary crushing directly undermines your entire operation's profitability and throughput. Considérez ces défis communs:
Temps d'arrêt excessif pour la maintenance: Frequent liner changes and unplanned repairs on your primary crusher halt your milling circuit, coûtant des milliers de dollars par heure en perte de production.
Inconsistent Feed Size to SAG/Ball Mills: Poorly sized crusher product creates bottlenecks in downstream grinding, reducing mill efficiency and increasing specific energy consumption (kWh/tonne).
High Abrasion Costs in Hard Rock Formations: The extreme abrasiveness of quartzrich gold ore leads to rapid wear on crusher components, driving up your cost per ton in replacement parts and labor.
Unreliable Performance with Variable Ore Grades: Fluctuations in ore hardness and clay content can cause plugging or capacity drops in crushers not designed for such variability.

Are you seeking a crushing solution that delivers consistent throughput, réduit les coûts d’exploitation totaux, and provides reliable firststage reduction for your gold recovery circuit?

2. APERÇU DU PRODUIT

The GC600HD Gyratory Crusher is engineered as a highcapacity primary crushing solution specifically for gold ore processing plants. Il est conçu pour accepter le runofmine (ROM) feed directly from the haul trucks, providing the critical first stage of size reduction.

Flux de travail opérationnel:
1. Minerai ROM (jusqu'à 1500 mm) is dumped directly into the crusher’s feed hopper.
2. A controlled gyrating motion of the mantle against the concave liners applies compressive force, breaking the ore by pressure.
3. The crushed product discharges via gravity through the bottom of the crusher, with a typical product size of 150250mm for direct feed to a secondary crushing circuit or SAG mill.

Champ d'application: Ideal for hightonnage greenfield projects or expansions requiring reliable primary crushing of hard and abrasive gold ores (par ex., veines de quartz, sulphidebearing rock). Limites: Ne convient pas aux collants, highclay ores without prior grizzly screening; requires a stable concrete foundation and significant headroom for installation.

3. CARACTÉRISTIQUES PRINCIPALES

Patented QuattroPlus Mantle Design | Base technique: Optimized crushing chamber geometry with variable curvature | Avantage opérationnel: Produces a more consistent product size distribution, improving downstream grinding circuit feed | Impact sur le retour sur investissement: Les données de terrain montrent un 58% reduction in grinding media consumption due to optimized feed.
Automated Liner Wear Monitoring System | Base technique: Ultrasonic sensor array integrated into the main frame | Avantage opérationnel: Provides realtime liner thickness data, enabling predictive maintenance scheduling during planned shutdowns | Impact sur le retour sur investissement: Eliminates unexpected liner failure downtime, improving crusher availability by an estimated 3%.
Hydroset Tramp Release & Ajustement des paramètres | Base technique: Hydraulic cylinders support the main shaft for instantaneous clearing | Avantage opérationnel: Allows quick discharge of uncrushable material and remote adjustment of the closedside setting (CSS) pour le contrôle des produits | Impact sur le retour sur investissement: Reduces clearing time from hours to minutes and maintains optimal throughput without manual intervention.
Arbre principal en alliage forgé & HighCarbon Steel Liners | Base technique: Material science focused on impact absorption and abrasion resistance | Avantage opérationnel: Withstands high shock loads from large feed material and extends service life in abrasive silica environments | Impact sur le retour sur investissement: Documented service life increases of 2030% over standard manganese steel in comparable gold ore applications.
Collecteur de suppression de poussière intégré | Base technique: Pressurized water spray system encircling the discharge point | Avantage opérationnel: Effectively controls silica dust at the primary transfer point, ensuring compliance with health and safety regulations | Impact sur le retour sur investissement: Mitigates risk of regulatory stoppages and reduces plantwide dust collection load.

4. AVANTAGES CONCURRENTIELS

| Mesure de performances | Norme de l'industrie (Jaw Crusher Equivalent) | GC600HD Gyratory Solution | Avantage (% Amélioration) |
| : | : | : | : |
| Disponibilité (Temps de disponibilité) | ~8588% (changements de doublure plus fréquents) | 9294% (durée de vie plus longue, predictive monitoring) | +6% |
| Capacité de tonnage (tph) @CSS 200mm| 2,000 2,200 tph| 2,600 2,800 tph| +25% |
| Coût par tonne (Pièces d'usure) Hard Ore| $0.85 $1.05 /tonne| $0.65 $0.75 /tonne| ~25% de réduction |
| Efficacité énergétique (kWh/tonne)| Higher due to reciprocating motion| Lower due to continuous compression action| 1015% Amélioration |

5. SPÉCIFICATIONS TECHNIQUES

Capacité & Notation: Designed throughput range of 2,600 – 2,800 metric tons per hour at a Closed Side Setting (CSS) of 200mm.
Exigences d'alimentation: Entraînement principal alimenté par un 600 Moteur électrique kW; lubrication and hydraulic systems require an additional 75 kW plant power supply.
Spécifications matérielles: Main shaft forged from SAE 4340 alloy steel; Concave liners manufactured from AS2074 H1B highcarbon steel; Eccentric bushing made from bronze with leadtin overlay.
Dimensions physiques: Total installed height approximately 7.5 mètres; Feed opening width of 1,500 mm; Gross operating weight of ~450 metric tons including base frame.
Plage de fonctionnement environnementale: Conçu pour des températures ambiantes de 20°C à +45°C; Dust suppression system rated for operation up to 3,000 mètres au-dessus du niveau de la mer.

6. SCÉNARIOS D'APPLICATION

Expansion de la mine à ciel ouvert à haut débit

Défi: A Tier1 miner needed to increase plant throughput by 25% but was constrained by their existing primary jaw crusher's capacity and excessive downtime for liner maintenance.
Solution: Replacement with two GC600HD Gyratory Crushers configured in parallel for redundancy.
Résultats: A atteint un débit soutenu de plus de 5,500 tph combined. Liner life increased by an average of 28%, contributing to an overall plant availability increase of 4%. The project met its expansion targets within schedule.

Remote Hard Rock Greenfield Project

Défi: A new project faced logistical challenges sourcing frequent replacement parts and required extreme reliability due to limited onsite maintenance expertise.
Solution: Installation of a single GC600HD unit with the Automated Liner Monitoring system and stocked critical spares kit.
Résultats: The monitoring system enabled precise planning for parts airfreight shipments six weeks in advance. The crusher achieved >93% availability in its first year despite highly abrasive ore.

7. CONSIDÉRATIONS COMMERCIALES

The GC600HD is offered under several commercial structures:
Achat d'équipement: Capital purchase includes crusher assembly motors drives lubrication system dust suppression manifold instrumentation
Base Tier Standard configuration as per technical specifications
Enhanced Tier Includes Automated Liner Monitoring System upgraded hydraulic filtration unit
Premium Tier Enhanced Tier plus full set installation supervision commissioning services
Optional features include special alloy liners specific rock analysis automated grease lubrication systems

Service packages are available separately ranging from basic preventive maintenance agreements comprehensive performancebased contracts covering parts labor periodic inspections

Financing options include traditional equipment leasing longterm rental with purchase option project financing support through our network partners

8. FAQ

What secondary crushing equipment is compatible with this gyratory?
The GC HD product range is designed to produce an optimal feed size for both large cone crushers or highpressure grinding rolls HPGRs common modern gold circuits

How does this equipment handle wet or sticky ore?
While efficient compression design handles some moisture we recommend pairing it with a robust grizzly screen scalper ahead feed hopper prevent clay bridging

Quel est le calendrier d'installation typique?
From prepared foundation delivery commissioning requires approximately weeks experienced erection crew This includes mechanical electrical plumbing integration

Do you provide sitespecific performance guarantees?
Yes based detailed ore characterization testing sample we provide guaranteed capacity wear rate performance metrics part commercial proposal

Are training operator maintenance staff included?
Standard commissioning includes days onsite training technical staff Optional comprehensive training modules available our regional facility