1. OUVERTURE ENTRAÎNÉE PAR POINT DE DOULEUR

Are escalating operational costs and unpredictable downtime eroding your gold recovery margins? Matière première incohérente, mechanical failures in harsh environments, and inefficient separation processes directly impact your bottom line. Considérez ces défis communs:
Recovery Losses: Même un 12% loss of fine or coarse gold due to inadequate equipment design represents significant, avoidable revenue leakage over a mine's lifecycle.
Temps d'arrêt pour maintenance élevé: Equipment not built for abrasive, continuous operation in remote locations leads to frequent stoppages, costly parts replacement, and diverted labor.
Energy and Water Intensity: Inefficient processing systems consume excessive power and water, driving up operational expenses and environmental management costs.
Inflexibilité opérationnelle: Fixedcapacity plants struggle with variable ore grades and feed rates, limiting responsiveness to changing deposit characteristics.
Safety and Environmental Risks: Outdated or poorly configured equipment can increase exposure to hazardous materials and complicate regulatory compliance.

La question centrale pour les directeurs d'usine est: how can you achieve higher recovery rates while simultaneously controlling operational costs and improving system reliability?

2. APERÇU DU PRODUIT

Cette gamme de produits englobe les poids lourds, conçu avec précision Gold Mining Equipment designed for the rigorous demands of alluvial (placer) and hard rock (filon) opérations minières. Our solutions focus on the efficient liberation, concentration, and recovery of gold particles.

A typical operational workflow integrates several key stages:
1. Réduction de la taille primaire & Lavage: Crushing and scrubbing units break down ore and liberate gold particles from clayey or conglomerate material.
2. Concentration gravitationnelle: Dense media separators, concentrateurs centrifuges, or jigs exploit the high specific gravity of gold to produce a primary concentrate.
3. Secondary Concentration & Raffinement: Shaking tables or advanced concentrators upgrade the primary concentrate, removing lighter gangue materials.
4. Security & Final Recovery: Intensive cyanidation units (like CIP/CIL plants) or direct smelting solutions extract gold from highgrade concentrates or gravity tails.
5. Gestion des résidus: Efficient pumps and dewatering equipment handle process residues for safe storage or water recycling.

Application scope includes largescale commercial mining operations, midtier contractors, and established exploration companies. Limitations exist for ultrahighaltitude or extreme Arctic operations without specific configuration; our engineering team provides sitespecific validation.

3. CARACTÉRISTIQUES PRINCIPALES

Conception d'usine modulaire | Base technique: Préconçu, skidmounted modules with standardized interfaces | Avantage opérationnel: Rapid deployment and commissioning reduces site construction time by up to 40%. Plant capacity can be scaled with additional modules. | Impact sur le retour sur investissement: Faster timetoproduction improves cash flow; modularity lowers future capital expenditure for expansion.

AbrasionResistant Lining Systems | Base technique: Highchrome alloy or proprietary polymer liners in critical wear zones | Avantage opérationnel: Extends service life of cyclones, pump volutes, and launder surfaces by 300600% compared to standard steel. | Impact sur le retour sur investissement: Dramatically reduces spare parts inventory costs and frequency of replacement downtime.

Système de contrôle de processus intelligent | Base technique: PLC/SCADA system with sensors for density, pression, and mass flow | Avantage opérationnel: Enables realtime monitoring and automated adjustment of feed rates, water addition, and concentrate grade for optimal recovery. | Impact sur le retour sur investissement: Maintains peak efficiency; field data shows a consistent 35% improvement in overall recovery through stable operation.

HighG Force Centrifugal Concentration | Base technique: Enhanced gravitational field within a rotating drum to capture fine gold | Avantage opérationnel: Recovers micronsized gold particles (down to ~10 microns) typically lost in traditional sluice systems. | Impact sur le retour sur investissement: Captures additional valuable product; essential for maximizing yield from complex ores.

Water Recycling Circuit Integration | Base technique: Closedloop design with thickeners and clarifiers | Avantage opérationnel: Reduces fresh water makeup requirements by 7085%, a critical advantage in arid regions. Minimizes environmental footprint. | Impact sur le retour sur investissement: Lowers water acquisition costs significantly; simplifies permitting.

HeavyDuty Structural Engineering | Base technique: Analyse par éléments finis (FEA)optimized frames using hightensile steel | Avantage opérationnel: Withstands constant vibration and dynamic loads without fatigue cracking during continuous 24/7 operation cycles.| Impact sur le retour sur investissement: Eliminates structural failure as a source of unplanned downtime over the asset's lifespan.

4. AVANTAGES CONCURRENTIELS

| Mesure de performances | Référence des normes de l'industrie | Our Gold Mining Equipment Solution | Avantage documenté |
| : | : | : | : |
| Overall Gold Recovery Rate (Alluvial) | 8592% depending on particle size distribution| Consistent operation above 95% with finegold module| +3% à +10% Recovery Improvement |
| Temps moyen entre les pannes (Critical Pump) | ~1 200 heures de fonctionnement| Dépasse 2,500 operating hours with abrasion package| +108% Reliability Improvement |
| Consommation d'énergie par tonne traitée| Varie considérablement; souvent non optimisé| Guaranteed maximum kWh/t based on plant configuration| Jusqu'à 1520% Energy Reduction |
| Temps de mise en service sur site (200 Usine de tph)| 812 weeks after component arrival| 46 semaines avec modules préassemblés| ~50% Faster Deployment |

5. SPÉCIFICATIONS TECHNIQUES

Specifications vary by plant configuration. Below are representative ranges for a standard modular gravity concentration plant:

Capacité/cote: Configurable à partir de 50 Tonnes par heure (TPH) à plus 500 TPH per processing line.
Exigences d'alimentation: Primary plant power demand ranges from 150 kVA (smaller units) à plus 1 AMIU (largescale facilities). All major motors are IP66 rated for dust/moisture protection.
Spécifications matérielles: Contact surfaces in slurry lines use ASTM A532 Class III Type A highchrome white iron (>28% Cr). Structural components use S355JR grade steel.
Dimensions physiques: Modular skid dimensions optimized for standard containerized transport (max width ~2.5m). Full plant footprint is provided per client layout.
Plage de fonctionnement environnementale: Conçu pour des températures ambiantes de 20°C à +50°C. Optional packages available for tropical/humid or subarctic conditions.

6. SCÉNARIOS D'APPLICATION

Exploitation de placers alluviaux en Afrique de l’Ouest

Défi: A contractor faced declining recoveries using traditional sluices due to an increasing proportion of fine (<100 micron) "flour" gold in their deposit. Significant value was being lost to tailings.
Solution: Implementation of a modular wash plant integrating aggressive scrubbing followed by a bank of highG force centrifugal concentrators specifically tuned for fine gold recovery.
Résultats: Overall site recovery increased from an estimated 78% à 94%. The payback period on the new equipment was achieved in less than five months of operation based on recovered additional ounces.

Hard Rock Quartz Vein Processing in Latin America

Défi: A midtier miner's existing jaw crusher/ball mill circuit produced a coarse grind that limited cyanide leach efficiency (~86%), while energy costs were prohibitive.
Solution: Introduction of a secondary cone crusher circuit for finer primary crushing and replacement with a more efficient vertical shaft impactor (TOUT LE MONDE) grinding mill ahead of leaching.
Résultats: Grind size optimized for liberation improved leach recovery to 93%. The more efficient VSI mill reduced specific energy consumption by approximately 18%, lowering operating cost per tonne.

7.CONSIDÉRATIONS COMMERCIALES

Our Gold Mining Equipment is offered under clear commercial frameworks:

Niveaux de tarification:
Tier I Standard Module Range: Fixed pricing on catalogued items (par ex., individual crushers, pompes).
Tier II Configured Modular Plants: Engineeredtoorder solutions priced based on capacity rating (200 TPH).
Tier III Full Turnkey Processing Facilities Projectbased quotation following full feasibility review.

Fonctionnalités facultatives & Mises à niveau: Common upgrades include advanced wear monitoring systems,
onboard power generation packages,
and automated reagent dosing systems
for leaching circuits

Forfaits de services: Choose from Bronze
(Scheduled Parts Supply),
Silver
(Annual Inspections + Parties), or Gold
(OnSite Technician + Guaranteed Uptime)
maintenance plans

Financing Options Available through our partners include:
3660 month equipment leasing structures
20/80 purchase financing plans
12month deferred payment terms

for qualified buyers

8.FAQ

Q1 Is your equipment compatible with our existing crushing circuit?
A1 Our modules are designed with flexible interconnection points Industrystandard flanges chute designs
and control voltage allow integration We conduct an audit of your current layout prior

to finalizing specifications

Q2 What is the expected operational impact during commissioning?
A2 For modular plants we target full commissioning within fourtosix weeks Our team manages the process aiming

to minimize disruption We provide detailed rampup protocols

for your operators

Q3 Do you offer performance guarantees?
A3 Yes we provide process performance guarantees based on representative ore samples tested at our facility These guarantees cover minimum recovery rates maximum energy consumption levels

and throughput capacity under defined conditions

Q4 What are the typical lead times?
A4 Lead times vary Standard modules ship within eighttoten weeks Configured plants require twelvetosixteen weeks Full turnkey projects follow an agreed project timeline outlined during contracting

Q5 How do you handle spare parts supply?
A5 We maintain strategic global parts depots Critical wear parts are stocked against your serial number You can also enroll in our automated parts replenishment program based on predicted wear cycles