Coke Vibrasie Skerm Kontrak Vervaardiger Beste Prys

Your Screening Operation Is Losing Profit—Here's the Data

Every ton of coke that passes through an undersized or poorly matched vibration screen costs your plant in three measurable ways: rejected product (tot 8% of throughput lost to offspec material), onbeplande stilstand (gemiddeld 14 hours per month for screen deck changes on inferior units), en excessive power consumption (older screens draw 30–40% more energy per ton processed). Plant managers report that blinding and pegging on coke fines alone can reduce effective screening area by 25% within the first 200 bedryfsure.

Are you still accepting 92% screening efficiency when 98% is achievable with the correct equipment? Is your current screen supplier delivering replacement parts within 48 ure, or are you stockpiling inventory because lead times stretch beyond three weeks? The difference between a commodity screen and a purposebuilt coke vibration screen from a contract manufacturer with direct pricing is the difference between margin erosion and consistent throughput.

Produk Oorsig: HeavyDuty Coke-vibrasieskerm

Hierdie toerusting is 'n linearmotion, multideck vibrerende skerm engineered specifically for coke handling—from green coke dewatering to calcined coke sizing. The operational workflow follows five stages:

1. Feed Distribution – Material enters via a flared feed box with replaceable wear liners, spreading across the full width of the screen deck to prevent material segregation.
2. Stratifikasie – Linear vibration (6.3–8.2 Gforce range) causes fine particles to migrate downward through the material bed toward the screen surface.
3. Skeiding – Material passes through woven wire or polyurethane screen panels (custom aperture sizes from 0.5 mm aan 150 mm) on 1–4 decks.
4. Oversize Discharge – Material retained on each deck exits through dedicated chutes, with impactabsorbing rubber liners at all transfer points.
5. Undersize Collection – Fines pass through to a common discharge or individual collection hoppers, depending on plant configuration.

Toepassingsomvang: Suitable for coke breeze screening, coke dewatering, coke crushing circuits, and final product sizing in steel mills, aluminum smelters, and calcining facilities. Beperkings: Not designed for materials exceeding 150°C continuous operating temperature without hightemperature bearing upgrades; not recommended for materials with more than 15% moisture content without heated deck options.

Kernkenmerke

HeavyDuty Exciter-samestelling

Tegniese basis: Dualshaft, counterrotating exciter with spherical roller bearings rated for 50,000hour L10 life under full load.
Bedryfsvoordeel: Your operators will experience consistent vibration amplitude regardless of material load variation—no amplitude dropoff when feed rate spikes.
ROI impak: Eliminates the 12–18% efficiency loss common with beltdriven exciters; reduces bearing replacement frequency from every 18 months to every 48 maande.

Modular Screen Panel System

Tegniese basis: Tensioned polyurethane panels with 40–55 Shore A durometer, reinforced with steel inserts at bolt holes.
Bedryfsvoordeel: Panel changeout time drops from 8 ure (bolted steel decks) aan 2.5 hours per deck using quickrelease wedge systems.
ROI impak: At $180/hour plant downtime cost, each panel change saves $990 in verlore produksie. Annual savings exceed $15,000 for plants with quarterly screen changes.

SelfCleaning Ball Deck Assembly

Tegniese basis: Rubber balle (25–50 mm diameter) housed in individual pockets beneath the screen surface, activated by screen vibration.
Bedryfsvoordeel: Continuous cleaning action prevents blinding from sticky coke fines—maintains 95%+ open area even with 8–12% moisture content.
ROI impak: Reduces manual cleaning frequency from twice per shift to once per week; eliminates the 4% production loss from blinded screen area.

Wear Protection Package

Tegniese basis: 12 mm thick AR400 steel liners at feed impact zones; 10 mm ceramic tile lining on side plates and discharge lips.
Bedryfsvoordeel: Your maintenance team will replace wear liners every 18–24 months instead of every 6–8 months on standard carbon steel screens.
ROI impak: $4,200 saved annually in liner replacement materials and $6,800 in labor costs for a single 2.4 m × 6.0 m screen.

Adjustable Stroke and Angle

Tegniese basis: Variable eccentric weights on exciter shafts (adjustable in 15° increments); deck angle adjustable from 0° to 25° via turnbuckle mounts.
Bedryfsvoordeel: One machine can be tuned for green coke (high moisture, taai) or calcined coke (skuur, droog) without mechanical modifications.
ROI impak: Eliminates the need for dedicated screens for different coke types—single machine handles multiple products, saving $85,000–$120,000 in capital expenditure.

Geïntegreerde stofopsluiting

Tegniese basis: Full enclosure with gasketed inspection doors and negativepressure dust collection ports (150–300 mm diameter).
Bedryfsvoordeel: Your plant meets OSHA PEL limits for respirable coke dust (0.15 mg/m³) without additional hooding or ductwork.
ROI impak: Avoids $25,000–$50,000 per year in potential OSHA fines and reduces respiratory protection program costs by 40%.

Afstandmonitering-koppelvlak

Tegniese basis: Vibrasie sensors (triaxial accelerometers) and temperature probes at exciter bearings, transmitting data via 4–20 mA loop or Modbus RTU.
Bedryfsvoordeel: Your control room receives realtime alerts when vibration levels deviate by more than 10% from setpoint—before bearing failure occurs.
ROI impak: Verminder onbeplande stilstand deur 60% (velddata van 14 installasies); each avoided bearing failure saves $8,500 in parts and $22,000 in verlore produksie.

Mededingende voordele

| Prestasie-metriek | Bedryfstandaard | Ons Coke Vibrasie Skerm Oplossing | Voordeel |
|||||
| Siftingsdoeltreffendheid (4 mm sny) | 88–92% | 96–98% | +6–10% improvement |
| Deck Change Time (per dek) | 6–8 hours | 2–2.5 hours | 65–70% faster |
| Draer Diens Lewe | 18–24 months | 48–60 months | 100–150% longer |
| Energieverbruik (kWh/ton) | 0.35–0.45 | 0.22–0.28 | 35-40% vermindering |
| Geraasvlak by 1 meter | 92–98 dB(A) | 82–86 dB(A) | 10–12 dB(A) vermindering |
| Gemiddelde tyd tussen mislukkings | 1,200 ure | 3,800 ure | 216% verbetering |
| Replacement Part Lead Time | 3–6 weeks | 48–72 hours | 85–90% faster |

Tegniese spesifikasies

| Parameter | Waarde (Standaard Model) | Waarde (HeavyDuty Model) |
||||
| Kapasiteit (coke, 25 mm sny) | 150–250 tons/hour | 300–450 tons/hour |
| Skerm area | 4.8 m² – 14.4 m² | 9.6 m² – 24.0 m² |
| Number of Decks | 1–3 | 2–4 |
| Vibration Amplitude | 6–12 mm (verstelbaar) | 8–14 mm (verstelbaar) |
| Vibrasie frekwensie | 750–1 000 RPM | 700–900 RPM |
| GForce-reeks | 4.5–7.2 G | 5.0–8.2 G |
| Motor Krag | 7.5–22 kW per exciter | 15–45 kW per exciter |
| Motor spoed | 1,500 RPM (4paal) | 1,500 RPM (4paal) |
| Screen Panel Material | Poliuretaan (40–55 Shore A) | Poliuretaan + steel backing |
| Aperture Range | 0.5 mm – 100 mm | 1.0 mm – 150 mm |
| Voergrootte (maks) | 75 mm | 150 mm |
| Bedryfstemperatuur | 20°C to +80°C | 20°C to +120°C (with HT bearings) |
| Gewig (leeg) | 4,200–8,500 kg | 7,800–15,200 kg |
| Overall Dimensions (L×B×H) | 4.5 m × 2.2 m × 2.8 m | 6.8 m × 3.0 m × 3.5 m |
| Kragtoevoer | 380–480 V, 3fase, 50/60 Hz | 380–690 V, 3fase, 50/60 Hz |

Toepassingsscenario's

Steel Mill Coke Breeze Screening

Uitdaging: A Midwestern U.S. steel mill was losing 12% of coke breeze production due to undersized screens (2.4 m × 4.8 m) that could not handle peak feed rates of 180 tph. Blinding from 9% moisture content required two operators per shift to manually clean decks, adding $62,000/year in labor costs.
Oplossing: Geïnstalleer a 2.4 m × 7.2 m dualdeck coke vibration screen with selfcleaning ball decks and 6 mm polyurethane panels. Feed box redesigned with AR400 liners to handle impact from 75 mm coke.
Resultate: Screening efficiency improved from 88% aan 97%. Manual cleaning eliminated entirely. Annual labor savings: $62,000. Recovered product value: $184,000/jaar (1,200 tons of previously rejected material). Terugbetalingstydperk: 11 maande.

Calcined Coke Sizing at Aluminum Smelter

Uitdaging: An aluminum smelter in the Gulf Coast region needed to produce three product fractions (25 mm × 12 mm, 12 mm × 6 mm, en 6 mm × 0 mm) from calcined coke with 8% vog. Existing tripledeck screens experienced bearing failures every 14 maande, veroorsaak 36 hours of downtime per event.
Oplossing: Supplied a 3.0 m × 7.2 m tripledeck screen with heavyduty spherical roller bearings (L10 lewe: 55,000 ure) and modular polyurethane panels with 12 mm, 6 mm, en 3 mm openinge. Integrated dust containment with 250 mm duct ports.
Resultate: Bearing failures eliminated over 28 maande van operasie. Product specification compliance improved from 91% aan 99.2%. Dust emissions reduced by 85%, achieving compliance with EPA MACT standards. Total cost of ownership reduced by 38% in vergelyking met vorige toerusting.

Green Coke Dewatering at Refinery

Uitdaging: A Gulf Coast refinery processing delayed coke needed to reduce moisture content from 18% to below 10% before calcining. Existing rotary dewatering screens consumed 0.52 kWh/ton and required weekly screen deck replacement due to abrasion from coke fines.
Oplossing: Geïnstalleer a 2.4 m × 6.0 m singledeck linear motion screen with 0.5 mm slotted polyurethane panels and highGforce exciter (7.8 G). Heated deck option added for coldweather operation.
Resultate: Moisture content reduced to 8.2% konsekwent. Energieverbruik het gedaal tot 0.26 kWh/ton—a 50% vermindering. Screen panel life extended from 7 dae aan 6 maande. Annual energy savings: $47,000. Panel replacement cost reduction: $38,000/jaar.

Kommersiële oorwegings

Toerustingprysvlakke

| Model | Skerm area | Dekke | Basisprys (USD) | Tipiese aanlooptyd |
||||||
| CVS48 | 4.8 m² | 1–2 | $38,000–$52,000 | 8– 10 weke |
| CVS72 | 7.2 m² | 1–3 | $55,000–$78,000 | 10-12 weke |
| CVS96 | 9.6 m² | 2–3 | $72,000–$105,000 | 12-14 weke |
| CVS144 | 14.4 m² | 2–4 | $98,000–$145,000 | 14-18 weke |
| CVS240 | 24.0 m² | 2–4 | $165,000–$240,000 | 18-22 weke |

Prices are FOB factory, excluding installation and commissioning. Volume afslag beskikbaar vir bestellings van 3+ eenhede.

Optional Features and Pricing

| Kenmerk | Price Addition | ROI Justification |
||||
| Hightemperature bearing upgrade (to 150°C) | +$4,200 | Extends service life in calcined coke applications by 3× |
| Heated deck system (elektriese, 220 V) | +$8,500 | Enables operation at 15%+ moisture without blinding |
| Ceramic tile side plate lining | +$3,800 | Extends side plate life from 3 years to 10+ jare |
| Afstandmoniteringpakket (sensors + gateway) | +$6,200 | Verminder onbeplande stilstand deur 60% |
| Dust collection hood with ductwork | +$4,500–$9,000 | Achieves OSHA compliance without plant modifications |
| Onderdele kit (laers, seëls, panele) | +$3,200–$7,500 | Reduces downtime from 48 ure aan 2 hours for common failures |

Dienspakkette

| Pakket | Dekking | Jaarlikse koste | Included Services |
|||||
| Basies | 12 maande dele | $0 (waarborg) | Replacement parts for manufacturing defects |
| Standaard | 24 maande dele + arbeid | $4,800/jaar | Kwartaallikse inspeksie, afstanddiagnostiek, priority parts shipping |
| Premie | 36 months full coverage | $8,200/jaar | All of Standard + onsite service within 48 ure, annual vibration analysis report |

Finansieringsopsies

• Netto 30 Bepalings – Standard for approved credit customers (minimum $50,000 annual purchase history)
• LeasetoOwn – 36month lease at 4.9% APR with $1 uitkoop opsie; monthly payments from $1,150 (CVS48 model)
• Toerusting Finansiering – 12–60 month terms through partner lenders; tariewe vanaf 6.5% APR for qualified buyers
• Volume afslag – 8% discount on orders of 3+ eenhede; 12% discount on orders of 5+ eenhede

Gereelde Vrae

V: How does this screen handle the abrasive nature of calcined coke compared to standard aggregate screens?
A: Standard aggregate screens use 6 mm mild steel liners and standard bearings. Our coke screen uses 12 mm AR400 steel at all impact zones, ceramic tile lining on side plates, and spherical roller bearings with hardened races (Rockwell C60 minimum). Velddata van 18 installations shows side plate wear rates of 0.3 mm per year versus 2.1 mm per year on standard screens.

V: What is the maximum moisture content this screen can handle without blinding?
A: With the standard polyurethane panels and selfcleaning ball deck, the screen maintains 95%+ open area at up to 12% vog. For moisture content between 12% en 18%, we recommend the heated deck option (electric resistance heating elements beneath the screen surface). Hierbo 18% vog, a dewatering screen with slotted panels is more appropriate.

V: Can this screen be retrofitted into an existing structure without modifying the support steel?
A: Ja, in most cases. Our standard mounting footprint matches common industry dimensions (2.4 m × 6.0 m, 3.0 m × 7.2 m). We provide detailed foundation drawings with dynamic load calculations. For nonstandard installations, we offer custom base frame adapters at an additional cost of $3,500–$6,000, afhangende van kompleksiteit.

V: What is the typical delivery time for replacement screen panels?
A: Standard polyurethane panels (all aperture sizes) ship within 48 hours from our regional warehouses. Custom aperture sizes require 10–14 working days. We recommend maintaining a spare set of panels for each deck (approximately $1,200–$2,800 per set) to eliminate downtime during panel replacement.

V: How does the pricing compare to OEM screens from major manufacturers?
A: Our base pricing is 25–35% lower than comparable models from major OEMs (bv., Metso, Sandvik, Terex). This is achieved through direct manufacturing without dealer markups and standardized component sourcing. Totale koste van eienaarskap verby 5 years is typically 30–40% lower due to reduced maintenance requirements and longer component life.

V: Watter waarborgdekking word verskaf, and what is excluded?
A: Standard warranty covers manufacturing defects in materials and workmanship for 12 maande vanaf ingebruikneming of 18 maande vanaf versending, wat ook al eerste voorkom. Excluded items: dra dele (skerm panele, voerings, seëls), damage from improper installation, operation outside specified parameters, and modifications without written approval. Extended warranty packages are available as listed in the service packages section.

V: Can this screen be integrated with existing PLC and SCADA systems?
A: Ja. The vibration monitoring system outputs 4–20 mA signals for vibration amplitude, laer temperatuur, and motor current. Modbus RTU (RS485) communication is standard. We provide full register maps and can integrate with AllenBradley, Siemens, en Schneider Electric-platforms. Custom protocol integration (Profibus, DeviceNet, Ethernet/IP) is available at an additional cost of $1,800–$3,200.